Fast PCB Studio
We will crack your IC sample. You will receive IC program in Bin / Hex file for burning any new ICs:
*IC sample will be decapped and will not be in work condition after IC crack.
IC Crack is to read out the IC programming code from the programmable ICs. Bin / Hex code will be obtain, then used to copy on new ICs, therefore may the new board functioning the same as the sample board.
*We could continuely reverse Hex/ Bin code to assembler code. However, the assembler code will not be able to further reverse engineer to source code, due to readability reason.
1. Capability
Unlockable Models include AT / STM / STC / PIC / TMS / Lattice / ProASIC3 / DSP56 / AUCD / PAL & More
2. Service Content
IC program extract (file extracted will be in machine code, e.g. Bin/Hex file, not in programmable language )
3. Pricing
Please send accurate IC model for quotation
4. Service flow
a. IC Model incorrect while quoting. E.g Customer provided the IC model AT89C51, but the IC received is AT89C51RC. The cost is able 10 times than than the original quote.
b. Customer’s IC foot burnt out. We have to do extra work because of it, and the work is even more than the IC Crack itself.
c. The Logo/model of the IC is not correct. It’s very abnormal but it happens. Sometime the coder may change the logo/model on the IC on purpose as well to increase the difficulty of IC Crack work. We will advise the customer for this case before continue the work.
We copy the design of the PCBA your need, and extract the machine code of IC program for the new IC duplication. We will send you 2 duplicated IC for your testing as this stage. Shipment cost of new IC samples are not included in service charge.
a. Shipping samples to FAST PCB STUDIO
b. 50% initial payment to start the project (PCB RE or IC Crack or both)
c. PCB RE and/or IC Crack work starts after sample & initial payment receival
d. Unlock and/or RE work completion, sending proof of work (IC samples and/or PCB PDF Schematics / Gerber screenshot)
e. Final 50% payment receival
f. Submit all the engineering files
g. Close the project of IC Crack and/or PCB RE
We will quote the PCBA for you once we obtain all the engineering files for re-production. The quotation for sampling and mass production will be available at this stage.
The same PCBA samples will be built for testing & debug. We will send you the sample boards for your approval before MP.
a. Quote for Prototype & Mass production
b. 100% payment before PCBA Prototype
c. Prototype complete. Testing & Debug, BOM / PCB file correction
d. Sending prototypes back to customer for testing
e. Approval of prototypes received from customer
We will manufacture then delivery the MP of PCBA to your address.
a.100% payment receival before mass production
b.PCBA component sourcing + Assembly + Testing
c.PCBA MP ready to ship out
Fast PCB Studio is one of the Leading PCB Copy & IC Crack service provider in Dongguan, China. We are dedicated to provide our clients the very reliable & cost effective Full solution for Electronic Reverse Engineering & Production.
(1) Under normal circumstances, the single-layer and double-layer board take upto 3-5 working days, the 4-6 layer board takes upto 7 to 12 workding days, and the 10+ layer board takes upto 12 to 15 working days. The multilayer board depends on the complexity of the circuit board;
(2) We have strong R&D resources and strong R&D support team in Beijing and Shenzhen, and we have our own talent training tutorial from experienced PCB reverse engineered in Shenzhen, which ensures 100% accuracy of PCB copy board;
(3) “To create a win-win situation with customers” is always our principle for cooperation. Based on your specific requirements, we will provide the most reasonable quotes in very short time, and would help to evaluate the cases from your pictures or samples free of charge.
*We are capable to generate the documents in various format with additional charge. In gerneral, we use software Protel99/Se.
We not only focus on advanced technology, but also carry out quality management of the entire PCB production process, including excellent product design, high-quality materials, suitable equipment, mature production processes, skilled production personnel, and strict and meticulous inspection, storage, packaging and so on.
We have the strong networks for electronic products from reverse engineering to productions. Our partners empowered us to provide the full solutions for PCB copy, PCBdesign & Modification, prototype error fixing, IC decryption (As known as IC Unlock or IC Crack), IC procurement, high-precision board production with state of art SMT facilitise, PCB assembly testing (Including BGA X-ray testing) and turnkey services. We could also provide design for products according to customer requirements, including the re-design / modification for the development of the existing product on function improvement and technical optimization in some fields.
We support our customers the after-sell services for all the designs and the productions from us.
Disclaimer: The use of our reverse engineering technologies is strictly limited within legal purposes, e.g. reproduce PCB artworks for old or obsolete printed circuit boards where the original is no longer available, PCB & Design tutorial or research and etc. Fast PCB Studio would not be responsible for any legal disputes for any inappropriate use of our technology on commercial competition, patent duplication or other prohibited use of reverse engineering technology by local laws.
Fast PCB Studio
We will unlock your IC sample. You will receive IC program in Bin / Hex file for burning any new ICs:
*IC sample will be decapped and will not be in work condition after IC Crack.
IC Crack is to read out the IC programming code from the programmable ICs. Bin / Hex code will be obtain, then used to copy on new ICs, therefore may the new board functioning the same as the sample board.
*We could continuely reverse Hex/ Bin code to assembler code. However, the assembler code will not be able to further reverse engineer to source code, due to readability reason.
1. Capability
Unlockable Models include AT / STM / STC / PIC / TMS / Lattice / ProASIC3 / DSP56 / AUCD / PAL & More
2. Service Content
IC program extract (file extracted will be in machine code, e.g. Bin/Hex file, not in programmable language )
3. Pricing
Please send accurate IC model for quotation
4. Service flow
a. IC Model incorrect while quoting. E.g Customer provided the IC model AT89C51, but the IC received is AT89C51RC. The cost is able 10 times than than the original quote.
b. Customer’s IC foot burnt out. We have to do extra work because of it, and the work is even more than the IC Crack itself.
c. The Logo/model of the IC is not correct. It’s very abnormal but it happens. Sometime the coder may change the logo/model on the IC on purpose as well to increase the difficulty of IC Crack work. We will advise the customer for this case before continue the work.
We copy the design of the PCBA your need, and extract the machine code of IC program for the new IC duplication. We will send you 2 duplicated IC for your testing as this stage. Shipment cost of new IC samples are not included in service charge.
a. Shipping samples to FAST PCB STUDIO
b. 50% initial payment to start the project (PCB RE or IC Crack or both)
c. PCB RE and/or IC crack work starts after sample & initial payment receival
d. Unlock and/or RE work completion, sending proof of work (IC samples and/or PCB PDF Schematics / Gerber screenshot)
e. Final 50% payment receival
f. Submit all the engineering files
g. Close the project of IC Crack and/or PCB RE
We will quote the PCBA for you once we obtain all the engineering files for re-production. The quotation for sampling and mass production will be available at this stage.
The same PCBA samples will be built for testing & debug. We will send you the sample boards for your approval before MP.
a. Quote for Prototype & Mass production
b. 100% payment before PCBA Prototype
c. Prototype complete. Testing & Debug, BOM / PCB file correction
d. Sending prototypes back to customer for testing
e. Approval of prototypes received from customer
We will manufacture then delivery the MP of PCBA to your address.
a.100% payment receival before mass production
b.PCBA component sourcing + Assembly + Testing
c.PCBA MP ready to ship out
Fast PCB Studio is one of the Leading PCB Copy & IC Crack service provider in Dongguan, China. We are dedicated to provide our clients the very reliable & cost effective Full solution for Electronic Reverse Engineering & Production.
(1) Under normal circumstances, the single-layer and double-layer board take upto 3-5 working days, the 4-6 layer board takes upto 7 to 12 workding days, and the 10+ layer board takes upto 12 to 15 working days. The multilayer board depends on the complexity of the circuit board;
(2) We have strong R&D resources and strong R&D support team in Beijing and Shenzhen, and we have our own talent training tutorial from experienced PCB reverse engineered in Shenzhen, which ensures 100% accuracy of PCB copy board;
(3) “To create a win-win situation with customers” is always our principle for cooperation. Based on your specific requirements, we will provide the most reasonable quotes in very short time, and would help to evaluate the cases from your pictures or samples free of charge.
*We are capable to generate the documents in various format with additional charge. In gerneral, we use software Protel99/Se.
We not only focus on advanced technology, but also carry out quality management of the entire PCB production process, including excellent product design, high-quality materials, suitable equipment, mature production processes, skilled production personnel, and strict and meticulous inspection, storage, packaging and so on.
We have the strong networks for electronic products from reverse engineering to productions. Our partners empowered us to provide the full solutions for PCB copy, PCBdesign & Modification, prototype error fixing, IC decryption (As known as IC Unlock or IC Crack), IC procurement, high-precision board production with state of art SMT facilitise, PCB assembly testing (Including BGA X-ray testing) and turnkey services. We could also provide design for products according to customer requirements, including the re-design / modification for the development of the existing product on function improvement and technical optimization in some fields.
We support our customers the after-sell services for all the designs and the productions from us.
Disclaimer: The use of our reverse engineering technologies is strictly limited within legal purposes, e.g. reproduce PCB artworks for old or obsolete printed circuit boards where the original is no longer available, PCB & Design tutorial or research and etc. Fast PCB Studio would not be responsible for any legal disputes for any inappropriate use of our technology on commercial competition, patent duplication or other prohibited use of reverse engineering technology by local laws.